New catalyst could make mixed plastic waste recyclable in one chemical step
Ever wondered where your plastics end up? A PET bottle can be washed, shredded, melted and given a second life. But most everyday items—toys, mattresses, car seats—are made from different plastics that refuse to mix when melted, producing unusable, contaminated material. Sorting is difficult and expensive, so most mixed plastic waste ends up burned or buried, and the materials are lost for good.
A Japanese research team has reported a potential solution in Angewandte Chemie International Edition. Using a newly developed catalyst and hydrogen gas, they selectively broke down polyurethane (PU) in mixed plastic waste, leaving coexisting polyester and polyamide materials intact for further processing and recycling.
"PU is the sixth-most widely used polymer, found in textiles, sponges and car seats, yet it remains largely outside the reach of recycling systems," explains Professor Takanori Iwasaki of Kyushu University's Faculty of Engineering. "Unlike PET, it does not melt when heated, so we need to break the chemical bonds directly."
The challenge is that PU is almost always blended or bonded with polyester and nylon in real-world products. Existing chemical methods break down PU but damage the other materials in the process, making separate recovery impossible.
Flipping the usual chemistry
Iwasaki, together with researchers at the University of Tokyo and Japan's National Institute of Advanced Industrial Science and Technology, found a way around this.
By combining an iridium-based catalyst with a phenolate salt—an activator for iridium catalyst—and using hydrogen gas at 130–170°C (266–338°F), the team successfully degraded PUs in mixed plastic waste while coexisting polyester and nylon remained completely unchanged.
"What I find most remarkable is that it overturns what every undergraduate learns in organic chemistry," notes Iwasaki. In standard chemistry, esters are more reactive than amides, and amides more reactive than urethanes. This means polyester should break down before nylon, and nylon before PU.
"By combining iridium catalyst and the right additive, we flipped that sequence entirely. The least reactive bond gets cut first, while the more reactive ones are left untouched."
From lab samples to products
Beyond laboratory experiments, the team tested the method on real commercial products. A kitchen sponge and blended underwear, containing PU alongside polyester and nylon, were successfully treated, with the PU breaking down into reusable components while the polyester and nylon stayed intact. The method also worked on a mobile phone case and an end-of-life car seat.
As the process achieves material separation and chemical recycling in a single step, it opens new possibilities for waste long considered too complex to handle. The team sees particular promise in end-of-life vehicle recycling and mattress disposal, two industries generating enormous volumes of PU waste with limited recycling solutions today.
Comfort without the recycling trade-off
The research also speaks to a broader tension in materials design. Faced with recycling difficulties, manufacturers increasingly replace high-performance materials with easier-to-recycle alternatives.
"Japan's Shinkansen trains are a good example," adds Iwasaki. "Newer models have replaced PU seat cushions with polyester. It is easier to recycle but noticeably less comfortable. If we can handle mixed plastics properly, manufacturers no longer need to make that trade-off."
Cost remains a major hurdle
The team acknowledges that cost and scalability remain to be addressed. Iridium, the metal at the heart of the catalyst, is rarer and more expensive than gold. Finding more affordable alternatives and improving catalytic efficiency are essential next steps.
"Plastic recycling is only the beginning," reflects Iwasaki. "As an organic chemist, what excites me most is the ability to selectively override chemical reactivity rules. My hope is that this opens more bridges between fundamental chemistry and real-world problems, from plastic waste to pharmaceutical synthesis and beyond."
Publication details
Yuto Yamada et al, Selective Degradation of Polyurethanes in Mixed Plastic Wastes via Ir‐Catalyzed Hydrogenolysis, Angewandte Chemie International Edition (2026). DOI: 10.1002/anie.4288189
Who's behind this story?
BSc Life Sciences & Ecology. Microbiology lab background with pharmaceutical news experience in oil, gas, and renewable industries. Full profile →
Master's in physics with research experience. Long-time science news enthusiast. Plays key role in Science X's editorial success. Full profile →
Citation: New catalyst could make mixed plastic waste recyclable in one chemical step (2026, July 9) retrieved 12 July 2026 from https://phys.org/news/2026-07-catalyst-plastic-recyclable-chemical.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.